Finished! – My Legacy Blanket

I hope you all had a great start in 2024 and are doing well!

I’d like to start the new year by showing an ‘old’ project: My Legacy Blanket.

If you’ve read my posts on this topic from last year, you’ll no doubt know that the Legacy Blanket a design by Pam Knighton-Haener from ‘A Yarn of Serendipity’. She designed this blanket as a legacy for her grandchildren. You can read the story about it here.

The quilt consists of 12 different squares and has a wide border. When Pam finished the instructions for the border last year, she also revised the instructions for the 12 squares. So I had the opportunity to test a few of them.

I started this project sometime in July or August last year. You might remember that I found it difficult to choose the yarn and colours. And I went through quite a few trials and errors when it came to arranging the colours too. In the end, I ended up crocheting more than one square twice because I wasn’t happy with my colour arrangement. To be honest, I still had my doubts when I was joining the squares …
BUT – surprisingly – once it was finished, everything fitted perfectly. I think it’s turned out really well and I LOVE the result!


My blanket was finished by the middle of December, but unfortunately I had no chance to take some nice pictures. We had a VERY long period with lots of rain, dark clouds, a bit of snow, fog, lots of rain again, well, winter …, you get the picture …

But here, at last, is a brief summary and a few photos:

My Yarn and Colours

My final choice of yarn and colours was

  • Drops Lima – 65% Wool, 35% Alpaca (100 m / 50 g)
    • colour 100 – Off White
  • Drops Merino Extra Fine – 100% Wool (105 m / 50g)
    • colour 07 – Light Taupe
    • colour 15 – Light Sea Green

Lima and Merino Extra Fine are both DK-weight yarns (#3, Light Worsted).
The fact that I mixed the two yarns was simply a matter of colour tones. Colour 100 – Off White looks slightly softer on Lima than on Merino, probably because of the yarn’s texture. And I preferred that

My Layout and Colour Placement

I used Drops Lima in Off White as main colour and only added a few accents with Light Taupe and Light Sea Green. So, in my notes below, I just listed the rounds with the accent colours – all other rounds are worked in Off White.

If you are interested in my colour scheme you can also download it here

Some technical aspects and measurements


My squares and the border are worked with a 4 mm hook throughout. Only for the Zipper Join and the last round of the border I went up to a 5 mm hook.

Each of my squares measures about 25 cm (about 10”). The final size of the blanket is about 90 x 115 cm ( 35,5 x 45 inches).

I’m sorry, but with all the changes and re-starts I’ve made, I didn’t keep track of how much yarn I used.
In total, I used just over 900 g of yarn. As a very rough estimate, I’d say you’ll need almost 50 g of Off White for each of the squares, plus another 100 g or 150 g for the border. On top of that, you’ll need 2 or 3 balls each of Light Taupe and Light Sea Green. But that’s just a rough guide.

The patterns for all these lovely squares and the border are available in Pam’s Ravelry store.

In case you missed my previous posts about this project, you will find them here

Looking at these photos, I have to say: despite all the ups and downs, it was a fantastic journey, and I’m absolutely delighted with the result!

Have a lovely week 💕

Progress with my Legacy Blanket

Last reviewed on May 14, 2026

YAY! It took a while because I spent so much time thinking about the colours and how to arrange them … But finally … all 12 squares are finished! All tails are worked away and all squares are blocked.

These are the last three squares that were missing from my collection.

Lauren Rose

Brood of Angels

Macey Ann

I’ve just prepared the first squares to be joined together and spent a while working on the layout.

After arranging and rearranging the squares a few times, I settled on the layout shown on the left. I hope it will look nice!

The Zipper Join

In the Justyce Destany Border pattern for the Legacy Blanket Pam recommends to use the Zipper Join for joining the squares.

I have to admit, I’m no expert when it comes to joining squares. I once used the ‘join-as-you-go’ method to join a few granny squares – but I think that’s about it. So, for the Justyce-Destany border, I’m trying my hand at the zipper-join for the first time.
The pattern includes a useful link to a video tutorial showing how to do this join. But if, like me, you prefer written instructions, I’ve also found a very clear and helpful guide from Raffaella from Raffamusa Designs.
Nevertheless, the beginning is a bit fiddly – at least I think so … But I am slowly getting the hang of it.
I experimented a bit with the crochet hook size at first and eventually settled on a 5.0 mm hook. I crocheted the squares using a 4 mm hook. However, with the larger hook, I find it easier to crochet even stitches when joining, which don’t end up too tight. So far, I’m happy with the result. It’s a very neat and flat join. Now on to the next squares!

Have a lovely time 💕

More Squares of my Legacy Blanket

Last reviewed on May 14, 2026.

Progress with my Legacy Blanket. The joining comes closer, 11 of 12 squares are finished now. All tails worked away and most of them already blocked!
I also revised some of my colour placements and am happy with the result!

Besides Pam just released the pattern for the Justyce Destany Border .

I was happy to help testing the border pattern. Even though my blanket isn’t finished yet, I can already give you a little sneak peek at the border.

For testing purposes I used two of my ›old‹ squares which I made right at the beginning of this journey: Drops Merino Extra Fine #50, Light Beige as main colour, #06 Brown Mix and #07 Light Brown for contrast. I discarded this colour scheme after I had worked the first two squares – somehow I didn’t like it. But – advantage – it gave me some ›leftovers‹ for testing the border.

And here some of my finished squares

Madux James

Brixton Carter-Lee

Marley Mae

Jalen Miles

Carter Jude

Olivia Grace

So far so good!
Lauren Rose (one of the revised ones) and Brood of Angels are still on the blocking board. The last one to finish is Macey Ann. Actually, Macey Ann was the very first Legacy Square I made. So it still has the ›old ‹ colour scheme and – besides now being part of my border patch – needs to be redone.

All patterns for the Legacy Blanket are available in Pam‘s Ravelry store.

Have a lovely weekend 💕

Some new Squares – My Legacy Blanket

Last reviewed on May 14, 2026

Do you love crocheting squares?
I’ve only just discovered my great love for them! A square is usually finished in no time and – something that’s very important to me – you see results quickly. That also makes them great ‘in-between projects’.
What’s more, they’re lovely to crochet when it’s still warm – you’re not stuck under a big, warm blanket. However, that’s not so important to me at the moment as it’s suddenly turned cold and autumnal here.

You may know that Pam Knighton-Haener from ‘A Yarn of Serendipity’ designed a very special blanket some time ago as a legacy for her grandchildren. It consists of 12 different squares, each symbolising her grandchildren and her family. The instructions for joining the squares and for the border are currently being tested. She has also revised the instructions for the squares, and I’ve had the chance to test a few of them. A great opportunity for a new blanket. It will only be the second one I’ve ever crocheted from assembled squares. Unbelievable!

So far I have already made 9 out of 12 squares. Unfortunately ›made‹ does not mean that they are actually finished. Only 3 of them are blocked with all the yarn ends worked away. For another 3 I am currently rethinking my colour placement and 3 squares still have a lot of loose ends that need to be done.

I’m afraid that’s one of my bad habits: I only weave in the loose ends once a square is finished. Yes, I’ve tried to change that! Yes, I know it’s much easier and less frustrating to do it straight away!
The only problem is: if I weave in the loose ends straight away, I often spot a mistake afterwards (again, yes – of course I know I should check it beforehand – but still…). By now, I’m almost convinced that weaving in the loose ends straight away might bring bad luck – so I just let them live a little longer.
Good things take time, as the saying goes.

Nevertheless, I love working on this blanket and I love my finished squares.

I am using a combination of Drops Lima and Drops Merino Extra Fine – both DK / Light worsted yarns – with a 4 mm hook.
Drops Lima consists of 65 % Wool and 35 % Alpaca. It has 100 m per 50 g. Merino Extra Fine is 100 % Wool with 105 m / 50 g.
My main colour is Lima #100, Off White. The accent colours are Merino Extra Fine #07, Light Taupe (Light Brown) and #15 Light Greyish Green.

I hope the blanket will wash well. Lima can only be hand-washed, but I really like the feel of the yarn. And I decided to combine the two yarns because of the colours. Colour 100, Off White, is identical in Lima and Merino Extra Fine, yet it still looks slightly different. Probably due to the structure of the yarn, the contrast with my accent colours looks softer in Lima. And I much preferred this look.

My finished squares are about 25 cm / nearly 10 inches.

Landyn Tahj

Kinnedy Nichelle

Jalen Stanley

All patterns for the Legacy Blanket -some paid, some free – are available in Pam’s Ravelry store.

Now on to finishing the next ones!

Have a lovely week 💕